DIFFERENT SMOKE OIL TANK CONFIGURATIONS
NOTE: THE FOLLOWING TANK CONFIGURATIONS ARE BASED ON CUSTOMER MEASUREMENTS AND THEREFORE MAY NOT FIT YOUR AIRCRAFT. CONFIRM SMOKE OIL TANK FIT BEFORE ORDERING!
|
SA-100H CONFIGURED FOR THE REAR BAGGAGE AREA IN A F1 ROCKET
|
SA-102 CONFIGURED FOR BEHIND THE RIGHT SEAT IN A VAN'S RV6A
|
SA-201 CONFIGURED FOR BETWEEN THE FEET IN THE FRONT SEAT AREA OF A PITTS S2A
|
SA-201 CONFIGURED FOR BETWEEN THE FEET IN THE FRONT SEAT AREA OF A PITTS S2A
|
SA-201 CONFIGURED FOR BETWEEN THE FEET IN THE FRONT SEAT AREA OF A PITTS S2A
|
SA-201H CONFIGURED FOR THE FRONT BAGGAGE AREA IN A VAN'S RV8
|
SA-201 CONFIGURED TO BE SEAT BELTED INTO THE RIGHT FRONT SEAT OF A CAP-10
|
SA-201 CONFIGURED TO BE SEAT BELTED INTO THE RIGHT FRONT SEAT OF A CAP-10
|
SA-100 WITH EXTERNAL FILL KIT INSTALLED ON THE OLD ADF RACK IN A NANCHANG CJ6A
|
VIEW OF EXTERNAL FILL FITTING INSTALLED ON THE FUSELAGE OF A NANCHANG CJ6A
|
SA-100H CONFIGURED FOR REAR BAGGAGE AREA IN VAN'S RV3
|
VIEW OF SA-100 INSTALLED ON OLD ADF RACK IN A NANCHANG CJ6A
NOTE: IF EXTERNAL FILL KIT IS NOT USED A BETTER CHOICE WOULD BE SA-100H (LOW PROFILE SO YOU CAN GET TO THE FILL CAP
EASIER)
|
SA-201 CUSTOM CONFIGURED FOR UNDER THE FUEL TANK OF A PITTS S2B
|
VIEW OF INSTALLED SA-201 CUSTOM CONFIGURED FOR UNDER THE FUEL TANK OF A PITTS S2B
|
VIEW OF INSTALLED SA-201 CUSTOM CONFIGURED FOR UNDER THE FUEL TANK OF A PITTS S2B
|
SA-201 INSTALLED ON OLD ADF RACK IN YAK 52
|
3/4" PLYWOOD PLATFORM ON OLD ADF RACK IN YAK OR CJ FOR INSTALLATION OF A SA-100
|
SA-100 INSTALLED IN REAR OF YAK 52
|
SA-201 INSTALLED IN BAGGAGE AREA OF YAK 52
|
SA-100H CONFIGURED FOR FRONT BAGGAG SHELF OF VAN'S RV8
|
SA-200T INSTALLED ON OLD ADF RACK IN CJ6A |
SA-100H CONFIGURED FOR FRONT BAGGAG SHELF OF VAN'S RV8
|
SA-200T INSTALLED ON OLD ADF RACK IN CJ6A
|
SA-201T CONFIGURED TO FIT FRONT SEAT OF THIS CUB.
RATCHET STRAPS WERE USED TO SECURE IT IN PLACE
|
SA-101 CONFIGURED FOR AN ACROSPORT
|
SA-100H CONFIGURED FOR THE REAR BAGGAGE AREA IN A VAN'S RV8
|
